.SBTTL;
.SBTTL;                     COPYRIGHT (c)  1983, 1986, 1988
.SBTTL;             BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
.SBTTL;                           ALL RIGHTS RESERVED.
.SBTTL;
.SBTTL;  THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND  COPIED
.SBTTL;  ONLY  IN  ACCORDANCE  WITH  THE  TERMS  OF  SUCH  LICENSE AND WITH THE
.SBTTL;  INCLUSION OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR  ANY  OTHER
.SBTTL;  COPIES  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
.SBTTL;  OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF  THE  SOFTWARE  IS  HEREBY
.SBTTL;  TRANSFERRED.
.SBTTL;
.SBTTL;  THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE  WITHOUT  NOTICE
.SBTTL;  AND  SHOULD  NOT  BE  CONSTRUED  AS  A COMMITMENT BY DIGITAL EQUIPMENT
.SBTTL;  CORPORATION.
.SBTTL;
.SBTTL;  DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR  RELIABILITY  OF  ITS
.SBTTL;  SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
.SBTTL;
.SBTTL
.SBTTL	DBG Configuration Prefix File
.SBTTL
.SBTTL	Symbolic configuration definitions
 
D$$DBG	=: 1			;This is DBG!
 
RT11	=: 0			;System code definitions
RSX11M	=: 1
 
LA36	=: 0			;Terminal type definitions
VT100	=: 1
VT52	=: 2
 
HARD	=: 0			;I/O mode definitions
SOFT	=: 1
 
.SBTTL	Configuration options
 
	SYSTEM	=: RT11		;Host system type
	IOMODE	=: HARD		;Host I/O mode
	TTYPE	=: VT100		;Terminal support
	E$$TXT	=: 1		;Enable LONG error messages
	$$$PIC	=: 1		;All PIC code
	D$$DRV	=: 1		;RT-11 SD: driver configuration
	SD$$VM	=: 1		;VD driver (VM/SD combo)
	R$$PRO  =: 1		;Support for P/OS processor
.SBTTL Setup defaults in the absence of option definitions
 
; Various modes that always default to false if not defined
 
.IIF NDF $$$PIC, $$$PIC	=: 0		;Default NOT a PIC version
.IIF NDF $$$ROM, $$$ROM	=: 0		;Mix I and D space to save some words
.IIF NDF D$$OUT, D$$OUT =: 0		;Not out of address space by default
.IIF NDF D$$DRV, D$$DRV =: 0		;Not RT-11 SD: driver configuration
.IIF NDF D$$DAS, D$$DAS =: 0		;No I/D space support
.IIF NDF RSTS,	   RSTS	=: 0		;Default to no RSTS/E code
.IIF NDF $DEBUG, $DEBUG	=: 0		;Default to NO debug mode
.IIF NDF $GLOBS, $GLOBS	=: 0		;Dont declare globals
.IIF NDF E$$TXT, E$$TXT =: 0		;Default to short error messages
.IIF NDF S$$STB, S$$STB =: 0		;Default to no .STB file code
.IIF NDF R$$PRO, R$$PRO	=: 0		;Default to no P/OS support.
 
; Default to FIS instruction set support for RT-11 unmapped debugger
; Default to use EIS instruction if not the RT-11 unmapped debugger
 
.IF	EQ,<<SYSTEM-RT11>!<D$$OUT>!<RSTS>>
		F$$FIS	=: 1		;Include FIS support.
		E$$EIS	=: 0		;Do not use EIS instruction set
.IFF;	EQ,<<SYSTEM-RT11>!<D$$OUT>!<RSTS>>
		F$$FIS	=: 0		;Do not include FIS support.
		E$$EIS	=: 1		;Use EIS instruction set
.ENDC;	EQ,<<SYSTEM-RT11>!<D$$OUT>!<RSTS>>